Viking K-1900-8-EWP Vandal Resistant Analog Phone with Auto Dialer with Keypad and Entry System

The K-1900-8-IP VoIP panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard manual dial phone.

View IP SIP System:

Compatibility List

K-1900-8-IP-EWP Features:

• Vandal Resistant Features:
• 12 gauge 316 stainless steel faceplate with permanent laser etched graphics
• Heavy duty metal keypad, hook switch, and armored cable
• T-10 security Torx drive mounting screws
• Weather Resistant Features:
• Marine grade 316 stainless steel faceplate and Torx security screws
• Internally sealed keypad
• Ring with adjustable volume and cadence
• Hearing aid compatible amplified handset with sealed push button volume control
• Two sets of SPDT 2 Amp relay contacts for door / gate or camera control
• Secure Remote Relay Control using Viking RC-4A
• SIP compliant
• PoE powered (class 2,
• Network downloadable firmware
• 36″ armored handset cord
• Programmable to speed dial up to 250 numbers
• 26 Bit Wiegand input for adding a Viking proximity card reader
• 26 Bit Wiegand output can connect to card reader input of an Access Control System
• Cycles to rollover phone number on busy or ring-no-answer
• Program up to 1,000 keyless entry codes and/or proximity card numbers
• Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
• Event logging with time and date stamp
• Remotely programmable
• Extended temperature range: -40°F to 140°F
• Diagnostics (for testing relays)
• Zinc plated steel rough-in box with (2) 0.75″ conduit knockouts included
• Flush mount using the included rough-in box or surface mount using a Viking VE-6X7 Surface Mount Box
• EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards